Continuous Bladder Irrigation
January 4, 2012 · Leave a Comment
Continuous bladder irrigation is a procedure usually required for two common reasons. One is that it is done in order to decrease the chances of the formation of blood clots in the bladder right after certain kinds of surgery. Second is to administer medication into the bladder in order to ward off an infection or maybe for other reasons. At times, there is a need for constant monitoring, to be certain that no complications may happen.
Continuous bladder irrigation is an ongoing infusion of a sterile solution into the bladder, generally by utilizing a three-way irrigation closed system that has a triple-lumen catheter. One lumen is for draining urine; another for inflating the catheter balloon, and the last one is for carrying the irrigation solution.
To prevent the formation of blood clot, permit urine free flow of urine and sustain patency of indwelling catheter (IDC), by the continuous irrigation of the bladder with the use of normal saline.
- The urinary catheter stays patent and urine is drained freely through the IDC
- Patient comfort is preserved
- Reduced or prevented formation of clot in the bladder or the IDC
- Reduced risk of urinary tract infection by using aseptic technique in connecting the bladder irrigation to the IDC
- Non sterile gloves
- Personal protective equipment (PPE)
- 0.9% sodium Chloride irrigation bags as per facility policy
- Chlorhexidine 0.5% with 70% alcohol wipes
- Continuous bladder irrigation set, closed urinary drainage bag with anti-reflux valve.
- 3-way catheter
- • IV pole
PROCEDURE – RATIONALE
- Explain the procedure to the patient and provide privacy. –This is to keep patient informed and comfortable
- Place the patient in a position for easy access to the catheter while preserving his comfort. – This will help save time and effort and keep the patient comfortable.
- Make sure that the patient has a three-way urinary catheter otherwise, a three-way catheter has to be inserted. – A three-way catheter is needed to allow for different fluids to pass through the set.
- Place the irrigation flasks on the IV pole and prime irrigation set, upholding asepsis of the irrigation set. – To prevent infection and other complications.
- See to it that only one of the irrigation flask clamps have been opened when priming the irrigation set or else the fluid can run from one flask to another. After the irrigation set has been primed, make sure that every clamp on the irrigation set is closed.
- Make sure that you do not start bladder irrigation until urine is freely draining.
Image courtesy of primumn0nn0cere.wordpress.com